Справочник Пользователя для Oregon Scientific EMR898A
GB
GB
* These states have certain parts where a different time zone is
followed. Check to make sure to set the correct time zone for your
area.
followed. Check to make sure to set the correct time zone for your
area.
** These states have certain areas where Daylight Savings are not
observed. In Hawaii, the whole state does not follow Daylight Savings.
observed. In Hawaii, the whole state does not follow Daylight Savings.
SETTING THE TIME AND LANGUAGE DISPLAYS
Your clock is designed to automatically set itself using the radio signal
from the U.S. Atomic Clock. However, should you need to manually
set the clock without using the radio signal, follow the instructions
below. You can also choose your language for the weekday display
here.
from the U.S. Atomic Clock. However, should you need to manually
set the clock without using the radio signal, follow the instructions
below. You can also choose your language for the weekday display
here.
Press or to adjust the values for each setting. To return
to normal clock mode, press the ALARM button anytime
during the procedures below.
to normal clock mode, press the ALARM button anytime
during the procedures below.
We recommended that you disable the RF signal before
manually setting the clock (
manually setting the clock (
→ p.15).
18
19
NOTE
NOTE
1. Press and hold MODE for 2 seconds.
2. Adjust the GMT difference according to
your timezone.
3. Choose between 12-hour or 24-hour
time formats.
4. Adjust the current hour.
5. Adjust the current minute.
9. Choose the language for the day
of the week displayed.
10. Return to normal clock operation.
6. Adjust the current year.
7. Adjust the current month.
8. Adjust the current date.
Press MEMORY
Press MEMORY
Press MEMORY
Press MEMORY
Press MEMORY
Press MEMORY
Press MEMORY
Press MEMORY
Press MEMORY
EMR898_GB(02/05)
12/1/03, 10:36 AM
Page 20-21
Adobe PageMaker 6.5C/PPC