Справочник Пользователя для Oregon Scientific RRM310P
3
EN
LCD DISPLAY
9. RESET: Press to return all values to the default
settings
10. : Switch radio on or off
11. : Toggle through preset radio stations
12.
11. : Toggle through preset radio stations
12.
: Increase or decrease volume
13. FM radio antenna wire
1. Time
2. 24 / 12 hr format
3. Calendar / alarm display
4. Alarm on / off
5. Radio alarm on / off
6. Offset time zone
7. Radio-controlled clock reception
8. Battery status
9. Adapter is disconnected
10. FM radio display / sleep / volume level / radio
2. 24 / 12 hr format
3. Calendar / alarm display
4. Alarm on / off
5. Radio alarm on / off
6. Offset time zone
7. Radio-controlled clock reception
8. Battery status
9. Adapter is disconnected
10. FM radio display / sleep / volume level / radio
frequency
11. Radio station
�
�
�
�
�
�
��
��
�
�
�
�
�
�
GETTING STARTED
BATTERIES
Insert batteries (2 x UM-4 / AAA 1.5V batteries) before
first use, matching the polarity (+ and -). Press RESET
after each battery change.
first use, matching the polarity (+ and -). Press RESET
after each battery change.
Batteries are low, or there are no batteries installed
and only the adapter is connected.
NOTE
• The batteries are for back-up use only. Please use
• The batteries are for back-up use only. Please use
the adapter for continuous use.
• It is recommended that you use alkaline batteries
with this product for longer performance.
• Do not use rechargeable batteries with this
product.
ADAPTER
The batteries serve as a back-up power supply. For
continuous use of the projector, install the adapter at
the base of the unit.
continuous use of the projector, install the adapter at
the base of the unit.