Справочник Пользователя для Oregon Scientific BAR888RA

8

EN

To force a manual search for Atomic Clock signals,

press and hold 

 for 2 seconds. If  no signal is found,

check the batteries.

NOTE If  the Atomic Clock signal is received and the
hour is incorrect, use the “timezone offset” feature to
adjust it to the appropriate timezone. Please see “Set
Clock” section for instructions.

Perform this step if  you cannot receive Atomic Clock

signals. Press and hold 

 for 2 seconds. Then, manually

set the clock following the “Set Clock” instructions.

The signal icon indicates that the Atomic Clock
feature is 

ON. No icon means that it is OFF.

You only need to do this if  you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).

1. Press and hold 

 for 2 seconds. The Clock

Area will blink.

1. Press 

((•)) to switch to alarm display.

2. Press and hold 

((•)) again for 2 seconds. The alarm

settings will blink.

3. Select the hour and minute. Press 

 or 

 to

change settings. Press 

((•)) to confirm.

2. Select the time zone, hour, minute, year, month, day,

and language. Press 

 or 

 to change the setting.

Press 

MODE to confirm.

NOTE The language options are (E) English, (F)
French, (D) German, (I) Italian, and (S) Spanish.

NOTE The time zone options are (PA) Pacific, (CE)
Central, (MO) Mountain, and (EA) Eastern.

Press 

MODE to toggle between Clock with Seconds

and Clock with Weekday display.

This product is equipped with a 2-minute crescendo
alarm.

Press 

((•)). The alarm time status will show in the Clock

Area.

BAR888RA_EN_R15

4/12/05, 9:43 AM

8