Справочник Пользователя для Delta TE-2000
10
Getting Started
E
To install journal paper
Step 1
Remove the printer cover.
Step 2
Open the platen arm.
Step 3
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 4
Put the leading end of the
paper over the printer.
paper over the printer.
Step 5
Close the platen arm
slowly until it locks
steadily.
slowly until it locks
steadily.
Step 6
Remove the paper guide of
the take-up reel.
the take-up reel.
Step 7
Slide the leading end of
the paper into the groove
on the spindle of the take-
up reel and wind it onto
the reel two or three turns.
the paper into the groove
on the spindle of the take-
up reel and wind it onto
the reel two or three turns.
Step 8
Replace the paper guide of
the take-up reel.
the take-up reel.
Step 9
Place the take-up reel into
place behind the printer,
above the roll paper.
place behind the printer,
above the roll paper.
Step 10
Press the
|
key to take
up any slack in the paper.
During machine
installation, press the
installation, press the
|
key after power on.
Complete
Replace the printer cover.