Справочник Пользователя для National Instruments NI 5620
© National Instruments Corporation
1-1
1
Taking Measurements
with the NI 5620
with the NI 5620
Thank you for buying a National Instruments (NI) 5620 digitizer.
This chapter provides information on installing, connecting signals to,
and acquiring data from the NI 5620.
This chapter provides information on installing, connecting signals to,
and acquiring data from the NI 5620.
The NI 5620 has the following features:
•
One 14-bit, 64 MS/s analog-to-digital converter (ADC)
•
Deep onboard sample memory (amount varies depending on model)
Installing the Software and Hardware
For step-by-step instructions for installing the NI-SCOPE software and the
NI 5620, see the Where to Start with Your NI 5620 Digitizer document.
There are two main steps involved in installation:
NI 5620, see the Where to Start with Your NI 5620 Digitizer document.
There are two main steps involved in installation:
1.
Install the NI-SCOPE driver. You use NI-SCOPE to write programs
to control your NI 5620 in different application development
environments (ADEs).
to control your NI 5620 in different application development
environments (ADEs).
2.
Install your Spectral Measurements Toolset (SMT) CD, if included.
The SMT provides frequency-domain functionality and examples.
The SMT provides frequency-domain functionality and examples.
3.
Install your NI 5620. See the Where to Start with Your NI 5620
Digitizer document.
Digitizer document.