Справочник Пользователя для Toshiba B-419-GS10-QQ

EO1-33030 

4.3 Possible Problems 

4- 3 

This section describes problems that may occur when using the printer, and their causes and solutions.  
 

The printer will not turn 
on. 

1.  The Power Cord is disconnected. 
2.  The AC outlet is not functioning 

correctly. 

3.  The fuse has blown, or the circuit 

breaker has tripped. 

1.  Plug in the Power Cord. 
2.  Make sure that the power is supplied 

using another electric appliance.  

3.  Check the fuse or breaker. 

The media is not fed. 

1.  The media is not loaded properly. 
2.  The printer is in an error condition.  

1.  Load the media properly. 
2.  Solve the error indicated by the LED 

state.  (See Section 4.1. LED State.) 

Nothing is printed on 
the media. 

1.  The media is not loaded properly. 
2.  The media cover is not closed properly. 
3.  Improper media is used. 

1.  Load the media properly. 
2.  Close the Media Cover completely. 
3.  Use the specified media. 

The printed image is 
blurred. 

1.  Improper media is used. 
2.  The Print Head is not clean.  

1.  Use the specified media. 
2.  Clean the print head using the Print Head 

Cleaner or a cotton swab slightly 
moistened with ethyl alcohol. 

This section describes how to remove jammed media from the printer.  

 
 

  Open the Media Cover. 

  Remove the jammed media. 

  Clean the Platen and sensors as described in Section 3.1. 

Do not scratch the Print 
Head or Platen using a 
sharp instrument, as this 
may cause media feed 
failure or damage to the 
printer.