Справочник Пользователя для Toshiba GD-1300
79
5
TIMER OPERATIONS
The timer function allows you to set a transmission or polling operation to be performed automatically at a time you
specify. Up to five transmission operations or polling operations can be set at any one time, and the times they will
be performed can be specified up to a week in advance.
specify. Up to five transmission operations or polling operations can be set at any one time, and the times they will
be performed can be specified up to a week in advance.
You can use this function, for example, to take advantage of lower night time telephone rates without having to be
there when the operation is performed.
there when the operation is performed.
●
For a timer transmission, scan the original into memory when you set the transmission. Scanning the original into
memory is convenient because you do not have to worry about original mix-ups or forgetting to load the original.
memory is convenient because you do not have to worry about original mix-ups or forgetting to load the original.
●
If the memory becomes full while the original is being scanned, "MEMORY FULL" will appear in the display.
• Press the [START] key (
) to transmit the pages that have been stored up to that point in memory.
• Press the [CLEAR ALL] key (
) to cancel the entire transmission.
Setting up a timer transmission job:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "1:TIMER MODE" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
to select "1:SET".
To cancel a timer operation, select "2:CLEAR".
4
Enter the time at which transmission
will take place with the numeric keys.
will take place with the numeric keys.
Enter two digits for the
hour and two digits for
the minute.
hour and two digits for
the minute.
5
Press the [
] key (
) or [
] key (
)
to select "AM" or "PM" and press the
[ENTER] key.
[ENTER] key.
Your fax machine
The scheduled
time arrives
time arrives
Recipient
beep
Transmission begins
Transmission
/reception
• Select the recipient
-sending method
-time
-time
• Select transmission
settings
memory
"1:TIMER MODE"
Selection
"1:SET"
Selection