Справочник Пользователя для KYOCERA 2540

5-4

Troubleshooting

If the touch panel displays any of these messages, follow the 
corresponding procedure.

Is the indicated cover open?

Close all covers securely.

—

Are any covers open?
Does the message indicate 
which cover is open? 

Close all covers securely.

—

Is the optional document 
processor open while loading 
the original?

Close the document processor.

—

Is the optional document 
processor top cover open? 

Close the document processor 
top cover.

Refer to Operation 
Guide, Chapter 2

Set cassette #.
(Close paper cassette #.)

Is the indicated cassette not 
fully closed?

Pull out the cassette and push in 
securely.

—

Open cassette #, check and 
remove paper from inside of the 
machine.
(Open cassette #, check and 
remove paper from inside of 
machine.)

—

Completely pull out the 
indicated cassette and remove 
any paper inside. 

—

Is the paper feed unit securely 
pushed into the machine?

Pull out the paper feed unit and 
securely push it all the way into 
the machine.

Refer to Operation 
Guide, Chapter 6

Add paper in cassette #.
(Add paper cassette #.)

Is the indicated cassette out of 
paper?

Load paper. If the same type of 
paper is loaded in another 
cassette in the same orientation, 
you can press either one of 
paper selection keys on the left 
of the touch panel to switch to 
that cassette for copying.

—

Add paper in the Multi Purpose 
Tray. 
## size
(Place paper on the Multi 
Purpose Tray.
## size)

Is paper of the specified size 
loaded in the MP tray?

Load paper of the size indicated 
in the MP tray.

Refer to Operation 
Guide, Chapter 2

Add paper in the Multi Purpose 
Tray.
(Add paper on the Multi Purpose 
Tray.)

Has all the paper on the MP tray 
been fed? 

Load paper in the MP tray.

Refer to Operation 
Guide, Chapter 2

Is the specified size paper 
loaded in the MP tray?

Reconfigure the size of the MP 
tray.

Refer to Operation 
Guide, Chapter 2

Is the specified size paper 
loaded?

Load paper of a size that can be 
used.

—

Is the orientation of the specified 
paper different from that of the 
original?

Change the orientation of the 
original. If you press the Start 
key without doing so, the 
original will be copied at the 
current size.

—