Инструкции Пользователя для Brother FAX 750

T R O U B L E S H O O T I N G A N D M A I N T E N A N C E

Try changing your resolution to FINE or SUPERFINE (see “Resolution”
p. 55). Make a copy to verify the FAX/MFC’s scanner operation.

Check for a dial tone.

Change TONE/PULSE setting (see “Setting Dialing Mode (Tone/Pulse)”
p. 27).

Check all line cord connections, and make sure the curled handset cord
is not in the EXT jack.

Check power cord connection.

Send a manual fax by pressing 

Hook

 or 

Speaker Phone

—OR—Lifting the

handset, and dialing the number. Wait to hear fax receiving tones before
pressing 

Start

.

Use your FAX/MFC to make a copy. If the copy shows the same
problem, the scanner area is dirty. Lift the front cover and check the
document path. Clean the scanner’s white tape and the glass strip under
the tape using isopropyl alcohol and a lint-free cloth (see p. 122).

The FAX/MFC knows the incoming call is not a fax so it is signaling
you to answer the telephone call. Pick up the FAX/MFC handset or
answer from an extension phone and press your FAX/MFC’s Telephone
Answer Code (default setting is #51).

If you have answered the FAX/MFC handset, press 

Start

, and hang up

immediately.

If you answered at an extension phone, press your three-digit Fax Receive
Code (the factory setting is  51). When your FAX/MFC answers, hang up.

If your FAX/MFC is set to Easy Receive ON, and it answers voice calls
by trying to receive a fax, try turning Easy Receive to OFF.