Справочник Пользователя для Brother T76

Скачать
Страница из 98
6
   Chapter 
Connecting the Power Cord
Memory Storage
Your machine is equipped with an internal battery that will keep the date and time information for 
up to about 15 hours (FAX-T76), about 9 hours (FAX-T74) after power has been cut off. After that 
time, the date and time will be lost and you will have to re-enter the information. In the event of a 
power failure, all settings in the INITIAL SETUPSETUP RECEIVESETUP SENDSET 
QUICK-DIAL
REMOTE FAX OPT and SETUP TAD functions are stored permanently except 
POLLING RXCONTRASTRESOLUTIONOVERSEAS MODECALL RESERVE
TIMER and POLLED TX.
On the FAX-T76, it will retain the data for Out-of-Paper Reception, Memory Transmission and 
Message Manager for up to 6 hours after a power interruption.
Setting the Date and Time
The screen displays, the date and time you set, whenever the machine is in stand-by mode. It will 
print the date and time on every fax you send.
In the event of a power failure, the machine maintains date and time information for about 15 hours. 
All other settings remain unaffected.
1
Press 
Menu/Set
1
2
.
2
Enter the two digits of the year, and press 
Menu/Set
. “01” is retgistered as 2001 in the machine.
3
Enter two digits for the month and press 
Menu/Set
.
4
Enter two digits for the day and press 
Menu/Set
.
5
Enter the time in 24 hour format and press 
Menu/Set
.
6
Press 
Stop
 to exit.
Using the speakerphone
Instead of using the handset, you can press 
Speaker Phone
.
On the FAX-T76, you can switch from handset to Speakerphone by pressing 
Speaker Phone
, then 
replacing the handset. You can switch from Speakerphone to handset by lifting the handset.
Automatic Redial
If the line is busy when you send a fax using automatic transmission, the machine will automatically 
redial up to 4 times (3 times for Ireland) at 2 minute intervals.
This fax must be earthed using a 3-pin plug.
Since the machine is earthed through the power outlet, you can protect 
yourself from potentially hazardous electrical conditions on the telephone 
network by keeping the power to your machine on when you connect it to 
a telephone line. Similarly, you can protect yourself when you want to 
move your machine, by disconnecting the telephone line first, and then 
the power cord.
Lightning and power surges can damage this product! We recommend 
that you use a quality surge protection device on the AC power line as well 
as on the telephone line, or unplug the lines during a lightning storm.