Справочник Пользователя для Brother T76

Скачать
Страница из 98
12
   Chapter 
Sequence of External TAD Reception 
When you leave your machine set in TAD mode, all calls will be answered by the externally 
connected telephone answering device, and fax calls will be received automatically provided they 
come from a machine which sends standard Calling tone (CNG).
Connecting an External Telephone
Your machine is equipped with a handset that you can use as a regular phone. However, you can also 
connect a separate telephone to your machine, as shown below.
Whenever this external phone (or TAD) is in use, the screen displays EXT. TEL IN USE, and, if 
the fax handset is lifted, an alarm sounds.
To disconnect the call on the external phone and switch to the fax, lift the handset and press 
Tel
 
(FAX-T74) or 
Speaker Phone
 (FAX-T76).
Incoming Call
The call is picked up
by the TAD.
(Recommended short
TAD ring delay such 
as 1 or 2 rings.) 
The external TAD
outgoing message
begins (recommended
length of 10 seconds 
or less).
The caller leaves a 
voice message on the 
external TAD.
The caller must press 
Start or enter your 
remote activation 
code to activate the
machine and press
Start.
The fax message is
received on paper.
The caller can also 
send a fax message 
after the voice message.
Manual 
fax call
Auto dial 
fax call
Fax reception is
automatically 
activated by 
fax tone.
The fax message 
is received on 
paper.
Voice call
External 
Telephone
Extension 
Telephone