Справочник Пользователя для Brother T76

   Chapter 11

You can retrieve the Memory Status List from a remote fax machine to see if you have any fax 
messages.

Dial your fax machine’s number.

When you hear the beep, immediately enter your Remote Access Code (1 5 9 

).

When you hear two short beeps, use the dial pad to press 

 

 

.

Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want 
the Memory Status List forwarded, and then press 

 

.

After you hear your fax machine beep, hang up and wait.

Your fax machine calls the remote fax machine. Your fax machine then sends the Memory 
Status List to the fax machine that you are calling from.

Dial your fax machine’s number.

When you hear the beep, immediately enter your Remote Access Code (1 5 9 

).

As soon as you hear two short beeps, use the dial pad to press 

 

 

.

Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want 
your fax messages forwarded, and then press 

 

.

After you hear your fax machine beep, hang up and wait.

Your fax machine calls the remote fax machine. The fax machine that you are calling from prints 
your fax messages.

You can check whether your fax machine has received any 
Document or Voice messages. If yes, you will hear one long 
beep. If no, you will hear three short beeps.

1  Document

2  Voice

If you hear one long beep, you can change the answer mode. 
If you hear three short beeps, you cannot change it. 
(Example: There is no TAD MSG when you want to change 
to TAD mode.)

1  TAD

2  F/T

3  FAX

After a long beep, you can exit remote control.

You cannot use 

 and # as dial numbers. However, if you want to store a pause, 

press #. 

You cannot use 

 and # as dial numbers. However, if you want to store a pause, 

press #.