Справочник Пользователя для Brother MFC7160C

C H A P T E R T W E N T Y F I V E

As with any sophisticated office product, errors may sometimes occur. If
this happens, your MFC often identifies the problem and displays an error
message. The table below explains the most common error messages.

You can correct most problems by yourself. If you need additional help, call
the Brother Fax-Back

 

System.

1-800-521-2846

1-800-681-9838

CHECK CASSETTE MFC cassette cover is open or MFC cassette is Close cassette cover or install cassette

not installed properly.

properly.

CHECK PAPER

MFC is out of paper.

Add paper to cassette.

CHECK PAPER SIZE Your Paper Size setting may not match the

Change either paper in cassette or change Paper

size of paper in the cassette.

Size setting.

COMM. ERROR

Poor phone line quality caused

Try the call again. If problem continues, call

communication error.

Telephone Company to check your  phone line.

CONNECTION FAIL You tried to poll a fax machine that is not in Verify the other party’s polling setup.

Polled Waiting mode.

COOLING DOWN

The print head has overheated.

Unplug the MFC and wait 30 minutes for

it to cool.

COVER OPEN

Top cover is not closed completely.

Open, then close, the cover.

DISCONNECTED

The other party or other party’s fax machine Try to transmit or receive again.

terminated the call.

DOCUMENT JAM

Documents were not inserted or fed properly,

See p. 229.

or document was longer than about 40"

 inches (90cm).

INK EMPTY

One or more of the ink cartridges is out of ink. Replace the ink cartridges. See pp. 243–246.

MACHINE ERROR

MFC has a mechanical problem

Call Brother Customer Service.

XX

MEMORY FULL

You can’t store data in the memory.

See p. 116.

NEAR EMPTY

One or more of the ink cartridges is running Order a new ink cartridge. See pp. ii.

out of ink.

NO RESPONSE/BUSY The number you dialed does not answer or

Verify the number and try again.

is busy.

NOT REGISTERED

You tried to access a One Touch or Speed Dial Set up the One Touch or Speed Dial number.

number that is not programmed.

See pp. 71–73.

PRINTER JAM

The paper is jammed  in the MFC.

See pp. 230–233.

SET CARTRIDGES

An ink cartridge is not installed properly.

Re-install the ink, seating it properly. See

pp. 243–246.

WARMING UP

The print head detects low temperature.

Wait until the MFC warms up.