Справочник Пользователя для Brother MFC7160C

S E T U P S E N D

Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.

Insert the document face down in the feeder.

Pick up the handset and listen for a dial tone
—OR—press 

Hook

 

or 

Speaker Phone

 and listen for a dial tone.

Enter the fax number you want to call (you can enter the digits using
the dial pad, or you can enter a One Touch or Speed Dial number or you
can call from the Tel-index).

When you hear the fax tone, press 

Start

.

If you’re using the handset, hang up.

This is the easiest way to send a fax. IMPORTANT:  Do not pick up the
handset, or press 

Hook

 or 

Speaker Phone

.

Insert the document face down in the feeder.

Enter the fax number using One Touch, Speed Dial, Tel-index or the
dial pad.

Press 

Start

.

If you’re sending a fax manually and the line is busy, press 

Redial/Pause

 to

retry the number.

If you’re sending a fax automatically and the line is busy, the MFC will
automatically redial up to three times at 5 minute intervals.

If the document feeder is empty, you can place a document in the feeder, set
temporary settings, dial a number, and begin scanning the fax into memory, even
when the MFC is receiving a fax, sending a fax, or printing a fax from memory.
The screen displays the new job number and how much memory is available.

If you get a MEMORY FULL message while scanning the first page of a fax
press 

Stop

 to cancel the scan. If you get a MEMORY FULL message while

scanning in a subsequent page, you’ll have the option to press 

Start

 to

transmit the pages scanned so far, or to press 

Stop

 to cancel the operation.