Справочник Пользователя для Panasonic KX-FP343AL
4. Fax
27
7
Press {SET}.
L
To erase other entries, repeat steps 5 to
7.
7.
8
Press {STOP}.
4.4.4 Sending the same
document to pre-programmed
parties
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 24).
select the desired resolution (page 24).
3
Press {BROADCAST}.
L
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling
each number sequentially.
scanned into memory. The unit will then
transmit the data to each entry, calling
each number sequentially.
L
After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L
If you select “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages that
the unit can transmit will decrease.
“PHOTO” resolution, the number of pages that
the unit can transmit will decrease.
L
If the document exceeds the memory
capacity, sending will be cancelled.
capacity, sending will be cancelled.
L
If one of the entries is busy or does not
answer, it will be skipped and redialled later
up to 2 times.
answer, it will be skipped and redialled later
up to 2 times.
To send the same document to a one-time
group of entries
group of entries
You can also select a one-time group of entries
to send the same document to. After
transmission, this group will be deleted.
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display “<ONE
TIME BROAD>
”.
4. Press {SET} to start programming the
entries you want to transmit to.
5. Press {A} or {B} repeatedly to display the
desired entry.
6. Press {SET}.
L
To program other entries, repeat steps 5
and 6 (up to 20 entries).
and 6 (up to 20 entries).
7. Press {SET} to start transmission to the
programmed entries.
To cancel broadcast transmission
1. Press {STOP} while the unit displays
“BROADCASTING”.
L
The display will show “SEND
CANCELLED?
CANCELLED?
”.
2. Press {SET}.
FP343AL.book Page 27 Tuesday, August 5, 2003 3:20 PM