Справочник Пользователя для KYOCERA km-f1050

Скачать
Страница из 170
Troubleshooting
141
P
roblem
 Solv
ing
When something unusual occurs, the display may show one of the Information Codes  listed below.  These
will help you to identify and correct the problem.
Information Codes
Info. 
Code
Meaning
Action
Page
001
Recording paper jammed when feeding from the 1st
cassette.
Remove the jammed paper.
002
Recording paper jammed when feeding from the 2nd
cassette.
Remove the jammed paper.
003
Recording paper jammed when feeding from the 3rd
cassette.
Remove the jammed paper.
007
Recording paper did not completely exit out of
machine.
Remove the Toner Cartridge and remove the
jammed paper.
008
Paper cassette is opened while paper is feeding.
Remove  the  jammed  paper  and  close  the
cassette.
010
No recording paper.
Load the recording paper.
011
Recording Paper Cassette is not installed properly.
Install the Recording Paper Cassette.
--
026
The backup battery is getting weak.
Replace  the  battery,  otherwise,  the  clock
contents may be lost.
030
Document is misfeeding.
1. Reload the document properly. 
2. Remove the document jam.
3. Adjust ADF.
031
Document paper is too long or jammed.
Document length exceeds 78.8 inches (2 meters).
1. Reload the document properly. 
2. Remove the document jam.
041
Out of toner.
Replace the Toner Cartridge.
043
Toner is getting low.
--
045
Toner Cartridge is not installed.
Install the Toner Cartridge.
060
Printer Cover is open.
Close the Printer Cover.
--
061
ADF Door (Document Return Guide) is open. 
Close the ADF Door.
--
063
Jam Access Cover (Optional 2nd Feeder Unit) is
open.
Close the Jam Access Cover.
--
064
Jam Access Cover (Optional 3rd Feeder Unit) is open. Close the Jam Access Cover.
--
400
During initial handshake, receiving station did not
respond or communication error occurred.
1. Check with the other party.
2. Reload the document and send again.
--
401
Remote station required a Receiving Password to
receive the document. 
Remote station does not have Confidential Mailbox.
Check the remote station.
--
402
During initial handshake, communication error
occurred.
Reload the document and send again.
--
403
No polling capability at the remote side.
Ask remote side to set "POLLED=ON".
--
404/405 During initial handshake, communication error
occurred.
Reload the document and send again.
--
406
Transmission Password does not match. 
Receiving Password does not match. 
Received from an unauthorized station in Selective
Reception mode.
Check the password or the telephone number
in One-Touch or Abbreviated station.
407
No confirmation from the receiving station for the
previous page sent.
Wait a few minutes and send again.
--