Справочник Пользователя для Ricoh 3232
Using Internet Fax Functions
68
3
IP-Fax Function
The IP-Fax function sends/receives documents between two facsimiles directly
connected to a TCP/IP network.
IP-Fax uses SIP and H.323 as the network protocol.
Specify an IP address or host name instead of a fax number for sending. When
using a gatekeeper, specify its alias telephone number. Specify addresses of the
gatekeeper or SIP server (proxy serer, registrar, redirect server) as appropriate
in “Setting IP-Fax” Facsimile Initial Settings. See “Fax Destination”,General Set-
tings Guide. You can also send to a G3 facsimile connected to the public switched
telephone network (PSTN) via a gateway (T.38-compliant).
When using an SIP server, you can send by specifying SIP User Name.
You can also transmit to a G3 facsimile connected to the public switched tele-
phone network (PSTN) via a gateway (T.38-compliant).
Since your machine and the receiver’s machine are on the same network, no mail
server is necessary. You can communicate with the receiver directly. Transmis-
sion speed is higher than with the G3 network.
To cancel IP-Fax transmission, see p.20 “Canceling a Memory Transmission”.
connected to a TCP/IP network.
IP-Fax uses SIP and H.323 as the network protocol.
Specify an IP address or host name instead of a fax number for sending. When
using a gatekeeper, specify its alias telephone number. Specify addresses of the
gatekeeper or SIP server (proxy serer, registrar, redirect server) as appropriate
in “Setting IP-Fax” Facsimile Initial Settings. See “Fax Destination”,General Set-
tings Guide. You can also send to a G3 facsimile connected to the public switched
telephone network (PSTN) via a gateway (T.38-compliant).
When using an SIP server, you can send by specifying SIP User Name.
You can also transmit to a G3 facsimile connected to the public switched tele-
phone network (PSTN) via a gateway (T.38-compliant).
Since your machine and the receiver’s machine are on the same network, no mail
server is necessary. You can communicate with the receiver directly. Transmis-
sion speed is higher than with the G3 network.
To cancel IP-Fax transmission, see p.20 “Canceling a Memory Transmission”.
ThemisC1_Fax_GB-F_FM.book Page 68 Wednesday, November 24, 2004 7:09 PM