Справочник Пользователя для Barco 26-0503000-00

Using the Main Menu

Please note:

The default IP address is 192.168.000.243.  

If DHCP is on, the IP address appears between brackets, and cannot be adjusted.

„

To adjust the IP address:

1.  Ensure that DHCP is off.

2.  On the IP Address Menu, rotate the knob to change the value of the digit to which 

the cursor is pointing.

3.  Press SEL to update the number and advance the cursor one place to the left.

4.  Repeat steps 1 and 2 as required.  Note that repeatedly pressing SEL advances 

through the digits, skipping the decimal-point field delimiter.  

5.  To accept the new IP address, press ESC at any time to exit the menu.  The new 

IP address will take effect at this point.    

From the System Menu, select 

 to display the Subnet Menu. 

Figure 4-8.  MatrixPRO Subnet Menu

When this menu item is selected (and DHCP is off), the cursor (

) is positioned under the 

right-most digit in the address.  

Please note:

The default Subnet Mask is 255.255.255.000.  

If DHCP is on, the Subnet Mask appears between brackets, and cannot be 
adjusted.

„

To adjust the Subnet Mask:

1.  Ensure that DHCP is off.

2.  On the Subnet Menu, rotate the knob to change the value of the digit to which the 

cursor is pointing.

3.  Press SEL to update the number and advance the cursor one place to the left.

4.  Repeat steps 1 and 2 as required.  Note that repeatedly pressing SEL advances 

through the digits, skipping the decimal-point field delimiter.  

5.  To accept the new Subnet Mask, press ESC at any time to exit the menu.  The 

new Subnet Mask will take effect at this point.    

S U B N E T

2 5 5 . 2 5 5 . 2 5 5 . 0 0 0

                                            ^