Справочник Пользователя для Barco 26-0503000-00

Using the Main Menu

„

Use the following steps to pre-select a test pattern:

1.  From the Main Menu, select Test Pattern to display the Test Pattern Menu.

2.  Scroll to line 2 (the “Resolution” line), and press SEL to display the edit cursor 

(#).

3.  Rotate the ADJUST knob and select the desired “global” test pattern resolution for 

all outputs.

4.  Press SEL to “accept” the new resolution, or press ESC to return to the current 

resolution without making changes.  

5.  Scroll to line 3 (the “Output” line), and press SEL to select either all outputs, or an 

individual output for which you want to set a test pattern.

6.  Scroll to line 4 (the “Type” line), which displays the current test pattern for the 

output selected on line 3.  Press SEL to display the edit cursor (#).  Please note:

If All is selected and test patterns match, the “global” test pattern is 
shown on the line.

If All is selected and all test patterns do not match, the label “Not All 
Same” is shown.

If an individual output is selected, its test pattern is shown.

7.  Rotate the ADJUST knob and select the desired test pattern.  Choices are:

H Ramp, V Ramp

75% Col Bars, 100% Col Bars

16x16 Grid, 32x32 Grid

Burst, 50% Gray

Gray Steps 1, Gray Steps 2

White, Black, Red, Green, Blue  

8.  Press SEL to “accept” the new pattern, or press ESC to return to the current 

pattern without making changes.  The pattern in pre-selected at this point.

9.  To route the selected pattern to an output:

a.  In the Output Selection Section, select the desired output.

b.  Press TEST PAT.

c.  Press TAKE.

The selected pattern is routed to the selected output only.  All other routes are 
unaffected.

10.  To clear the test pattern from the output:

a.  In the Output Selection Section, select the desired output.

b.  Press TEST PAT or select an input.

c.  Press TAKE.

If you selected All, but all test patterns currently do not match, 
you will overwrite all “differing” patterns with a new “global” 
test pattern.