Справочник Пользователя для Sierra Wireless 300
DART 300 Migration Guide
Sample Configurations
2110291 Rev 1.0
Page 9
Table 2-4 Host TCP Setup (client) (continued)
DART 200 Command
DART 300 Equivalent
Description
\Q2
(default)
N/A
Use hardware flow control (RTS/CTS). The
DART 300 supports only this flow control.
DART 300 supports only this flow control.
\T1
(default)
+WS70=20
Timed data forwarding (always used with binary
data). The DART 200 configuration assumes use
of the default value in S50 (20 tenths of a second).
data). The DART 200 configuration assumes use
of the default value in S50 (20 tenths of a second).
*B0
(default)
N/A
Disable broadcast reception.
*C1
(default)
N/A
Enable SLIP TCP header compression.
*G1
(default)
N/A
Multicast address selection.