Справочник Пользователя для HP (Hewlett-Packard) 441877-00F

 

Installation 12 

Components for these drivers are located in the \WIN2000 directory in the HP SoftPaq file. 

 

Adapter support on Linux 

The following Linux drivers are available for HP adapters: 

•

 

bnx2—Supports multifunction server adapters 

•

 

diags—HP ProLiant Webmin Network Server Adapter Diagnostics Module 

•

 

e1000—Supports NC110T, NC310F, NC340x, NC360x, NC364x, NC61xx, and NC71xx server 
adapters  

•

 

hp-nct—HP Network Configuration Tool (NCT) 

•

 

hp-pel—Supports ProLiant licensing  

•

 

iSCSI-boot—Supports the HP iSCSI boot feature 

•

 

iSCSI-offload—Supports the HP NC-Series Accelerated iSCSI offload feature 

•

 

tg3—Supports NC10xx, NC150x, NC320x, NC324x, NC325x, NC326x, NC67xx, and NC77xx 
server adapters 

•

 

utils—HP Network Server Adapter (NIC Information Collector) script - Network Survey Utility 

•

 

vlan_init—Supports Initialization and Configuration file for VLAN 

The drivers are distributed in source RPM format and are available in the HP SoftPaq file in the \Linux 

directory. See "Downloading files (on page 

)" for information. The source RPM is suitable for use on any 

system that has the RPM utility installed and a properly configured kernel source tree. 
In addition, the Linux (open source) drivers can be found at the HP software and drivers website 

HP ROMPaqs for specific servers can be found at the HP support website (

 

Adapter support on NetWare 

A network device driver must be installed before the Gigabit Ethernet adapter can be used with your 
Novell NetWare system. Before you can successfully install the adapter driver for Novell NetWare, the 

adapter card must be physically installed in the server and, typically, NetWare OS software must already 

be running on the server. Make sure that your server meets the hardware and operating system software 

requirements. 
For an adapter installation with an existing NetWare server, NetWare will automatically detect the new 

adapter and attempt to load the appropriate driver. 
To enable the Gigabit Ethernet adapter to function correctly, you need to install the latest support pack 

files. The latest support pack can be found at the Novell website (

Netware install program 
A commonly used method to install a driver on a NetWare server is through NWCONFIG. The following 

drivers are supported. 
Driver configuration parameters