Справочник Пользователя для HP (Hewlett-Packard) 441877-00F
Adapter configurations 24
Adapter configurations
HP NC-Series 10GbE Adapters
The following information describes the adapter properties available for HP NC-Series 10GbE adapters in
the Windows operating system.
See the HP Nework Configuration Utility online help for the properties available through the NCU.
See the Linux readme files for the properties available through the various Linux operating systems.
the Windows operating system.
See the HP Nework Configuration Utility online help for the properties available through the NCU.
See the Linux readme files for the properties available through the various Linux operating systems.
Windows Server 2003 and Windows Server 2003 x64
configurations
configurations
Although the default values should be appropriate in most cases, you may change any of the available
options to meet the requirements of your specific system. It is recommended that you use the HP Network
options to meet the requirements of your specific system. It is recommended that you use the HP Network
Configuration Utility to update HP NC-Series adapter properties. However, if you choose to update the
properties using the operating system's Device Manager, the following lists the properties that are
available for your HP adapter. The properties that are available through the HP NCU will differ. See the
online help file for NCU adapter property information.
online help file for NCU adapter property information.
HP NC-Series NetXen 10GbE adapter properties
The following describes the available advanced properties.
Property Parameter
Flow Control
Enables the Ethernet controller to send out pause frames or accept pause frames at
Ethernet level so that traffic is moderated and packets are not dropped.
Ethernet level so that traffic is moderated and packets are not dropped.
•
Default: Enabled
•
Values: Enabled/Disabled
Large Send Offload
Enables offloading of TCP Large Send Offload packets.
•
Default: Enabled
•
Values: Enabled/Disabled