Справочник Пользователя для HP (Hewlett-Packard) 441877-00F
Adapter configurations 29
Troubleshooting
Unable to boot host system on Windows or Linux
Problem:
Unable to boot the host system with the network adapter installed on Windows or Linux operating
Unable to boot the host system with the network adapter installed on Windows or Linux operating
systems.
Troubleshooting:
Troubleshooting:
•
Remove the network adapter and reboot. Verify that the system is able to boot without the network
adapter.
•
Verify that the required minimum 2 GB of system memory per 10 Gigabit Ethernet port is installed on
the host system.
NOTE:
Windows 32 bit may require the Physical Address Extension (PAE) option to utilize 4
GB or more of memory. PAE is a memory address extension that enables support of greater
than 4 GB of physical memory for most 32-bit (IA-32) Intel Pentium Pro and later platforms. For
more information, see PAE Memory and Windows information on the Microsoft
(
(
) website.
•
Verify that you have met the system requirements for your operating system.
•
Verify that no error messages occurred during the OS boot sequence.
•
Verify that the ROM scan is disabled in the BIOS.
•
Verify that no system error messages occurred in the following:
o
eventvwr.exe (Windows event viewer)
o
dmesg (Linux)
HP NC-Series Broadcom adapters
The following information describes the adapter properties available for HP NC-Series Broadcom
adapters in the Windows operating system.
See the HP Nework Configuration Utility online help for the properties available through the NCU.
See the Linux readme files for the properties available through the various Linux operating systems.
See the HP Nework Configuration Utility online help for the properties available through the NCU.
See the Linux readme files for the properties available through the various Linux operating systems.
Windows Server 2008 and Windows Server 2008 x64
configurations
configurations
Although the default values should be appropriate in most cases, you may change any of the available
options to meet the requirements of your specific system. It is recommended that you use the HP Network
options to meet the requirements of your specific system. It is recommended that you use the HP Network
Configuration Utility to update HP NC-Series adapter properties. However, if you choose to update the
properties using the operating system's Device Manager, the following lists the properties that are
available for your HP adapter. The properties that are available through the HP NCU will differ. See the
online help file for NCU adapter property information.
online help file for NCU adapter property information.