Справочник Пользователя для IBM PRO/100 SP
Table 7: S36 and S48 Configuration Settings
S48 = 7
S48 = 128
S36 = 1, 3
LAPM or async
async
S36 = 4, 6
LAPM, MNP, or hangup
MNP or hangup
S36 = 5, 7
LAPM, MNP, or async
MNP or async
S89 Timer to Control Sleep Mode
This command displays the number of seconds of inactivity (no characters sent
from the DTE, no RING) in the off-line command state before the modem
places itself into standby mode. A value of zero prevents standby mode.
from the DTE, no RING) in the off-line command state before the modem
places itself into standby mode. A value of zero prevents standby mode.
Note:
If a number between 1 and 4 is entered for this register, it will set the
value to 5, and the inactivity before standby will be 5 seconds. This is
done for compatibility with previous products which allowed time-outs
down to 1 s.
value to 5, and the inactivity before standby will be 5 seconds. This is
done for compatibility with previous products which allowed time-outs
down to 1 s.
Range: 0, 5-65
Default: 10
S90 Read-only Local Phone
This register tells the status of the Local Phone. It is read-only.
0 = on-hook
1 = off-hook
S91 Line Transmit Level
This register is effective only for Japan. It specifies the line transmit level in
dBm with an implied minus sign.
dBm with an implied minus sign.
Range: 6-15
Default: 15
Units: 1 dB
S108 Network Codec Type
S108=22 m-Law
Appendix B. Modem function
B-15