Справочник Пользователя для Multi-Tech Systems F2
Chapter 2 – Activation and Installation
Multi-Tech Systems, Inc. MultiModem GPRS Wireless Modem User Guide
12
Step 4 – Optional – Attach the Modem to a
Flat Surface
Flat Surface
To mount the Wireless MultiModem, do the following:
1.
Obtain mounting screws (two are needed) that are appropriate for the surface on which you will mount the
modem. For example, one might use two 6-32 self-tapping screws 5/8” in length to mount the unit in a
truck to the wall of the cab behind the passenger’s seat.
modem. For example, one might use two 6-32 self-tapping screws 5/8” in length to mount the unit in a
truck to the wall of the cab behind the passenger’s seat.
2.
Typically, the unit is mounted against a flat surface into which holes can be drilled. The mounting holes
(center-to-center) must be separated by 125mm or 4 -15/16 inches.
Drill the mounting holes at the desired mounting location.
Drill the mounting holes at the desired mounting location.
3.
Slide the mounting bridles into the corresponding slots on the backside of the modem chassis.
4.
Attach the modem with two screws to the mounting surface at the desired location on the equipment.