Справочник Пользователя для Multitech MT5600ZDXV

automatically sets the modem’s serial baud rate to match your computer’s

and also sets the modem’s parity.  It also clears the modem’s command

buffer. Once you’re in terminal mode, enter AT followed by <CR> to

check whether your modem is operational.  If everything’s fine, your

modem will respond OK.

You can dial by using the ATD command and the phone number of the

modem with which you wish to connect, e.g., ATD6127853500.  Your

modem will dial the number.  A “scrambling” noise is heard as the modem

negotiates the kind of connection it can make.  Once the modems have settled

on a common connection, a connect message on your computer’s video is

displayed.  To hang up a call, enter ATH0<CR>.  Your modem will return on

hook, just as if you had returned a phone’s handset to its cradle.  Your video

now displays OK, signifying that your modem is ready for your next command.

Communications software must be configured to work with the modem, your

computer, and the remote system it is calling.  Fortunately, most communications

programs make the process easy by providing a default initialization string to

your modem as well as defaults for most of the other required parameters.

Some software programs allow you to select your modem type from a menu.

By this method, initialization strings that correspond to a particular modem type

can be selected to operate optimally with the software being used.

*: See your respective software manual for further information on your

communications software.