Справочник Пользователя для Netgear FVS318N
Firewall Protection
132
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
WAN Users
The settings that determine which Internet locations are covered
by the rule, based on their IP address. The options are:
by the rule, based on their IP address. The options are:
• Any. All Internet IP addresses are covered by this rule.
• Single address. Enter the required address in the Start field.
• Address range. Enter the required addresses the Start and
Finish fields.
LAN WAN rules
DMZ WAN rules
DMZ Users
The settings that determine which DMZ computers on the DMZ
network are affected by this rule. The options are:
network are affected by this rule. The options are:
• Any. All computers and devices on your DMZ network.
• Single address. Enter the required address in the Start field to
apply the rule to a single computer on the DMZ network.
• Address range. Enter the required addresses in the Start and
Finish fields to apply the rule to a range of DMZ computers.
DMZ WAN rules
LAN DMZ rules
QoS Priority
The priority assigned to IP packets of this service. The priorities
are defined by Type of Service in the Internet Protocol Suite
standards, RFC 1349. The QoS profile determines the priority of
a service, which, in turn, determines the quality of that service for
the traffic passing through the firewall.
are defined by Type of Service in the Internet Protocol Suite
standards, RFC 1349. The QoS profile determines the priority of
a service, which, in turn, determines the quality of that service for
the traffic passing through the firewall.
The wireless VPN firewall marks the Type of Service (ToS) field
as defined in the QoS profiles that you create. For more
information, see
as defined in the QoS profiles that you create. For more
information, see
Note:
The wireless VPN firewall has preconfigured default QoS
profiles; you cannot configure the QoS profiles. A QoS profile can
become active only when you apply it to a nonblocking inbound
or outbound firewall rule.
become active only when you apply it to a nonblocking inbound
or outbound firewall rule.
LAN WAN rules
DMZ WAN rules
Bandwidth Profile
Bandwidth limiting determines how the data is sent to and from
your host. The purpose of bandwidth limiting is to provide a
solution for limiting the outgoing and incoming traffic, thus
preventing the LAN users from consuming all the bandwidth of
the Internet link. For more information, see
your host. The purpose of bandwidth limiting is to provide a
solution for limiting the outgoing and incoming traffic, thus
preventing the LAN users from consuming all the bandwidth of
the Internet link. For more information, see
on page 175. For outbound traffic, you can configure
bandwidth limiting only on the WAN interface for a LAN WAN rule.
Note:
Bandwidth limiting does not apply to the DMZ interface.
IPv4 LAN WAN rules
Table 33. Outbound rules overview (continued)
Setting
Description
Outbound Rules