Справочник Пользователя для Netgear FVS318N



On the RADVD screen for the DMZ screen (see 

 on page 95), select the check 

box to the left of each advertisement prefix that you want to delete, or click the Select 
All table button to select all advertisement prefixes.

Click the Delete table button.

Manage Static IPv4 Routing

Static routes provide additional routing information to your wireless VPN firewall. Under 
normal circumstances, the wireless VPN firewall has adequate routing information after it has 
been configured for Internet access, and you do not need to configure additional static routes. 
You should configure static routes only for unusual cases such as multiple firewalls or 
multiple IP subnets located on your network.

The wireless VPN firewall automatically sets up routes between 

VLANs and secondary IPv4 addresses that you have configured on 
the LAN Multi-homing (IPv4) screen (see 

on page 65). Therefore, you 

do not need to manually add an IPv4 static route between a VLAN 
and a secondary IPv4 address.

Configure Static IPv4 Routes



Select Network Configuration > Routing. In the upper right of the screen, the IPv4 
radio button is selected by default. The Static Routing screen displays the IPv4 settings. 
(The following figure contains one example.)