Справочник Пользователя для Black Box 34336

All options for each Quick Setup configuration are listed in Appendix B.
If you want to customize your Quick Setup configuration, see 3.0, Modem
Setup Options. For Hayes

®

mode options, see 5.0, Hayes Emulation Mode.

This 

dial mode (for use over ordinary phone lines) allows the
Modem to automatically dial (autodial) a previously 
stored phone number and respond to Hayes commands.
This mode is compatible with communication software 
packages that use Hayes-style AT commands. The 
Hayes mode Quick Setup is the factory default 
configuration for the Modem.

In V.25 bis mode, the Modem 

operates in conformance with CCITT recommendation 
V.25 bis, allowing you to store and direct dial or autodial 
phone numbers from the DTE. Use Quick Setup 2 if the 
DTE connected to the modem is asynchronous.

Same as Quick Setup 2 

except for data protocol. Use Quick Setup 3 if the DTE is 
synchronous-character oriented (bisynchronous).

Same as Quick 

Setup 2 except for data protocol. Use Quick Setup 4 if 
the DTE is synchronous bit-oriented (SDLC/HDLC).

When the Modem is in

Dumb mode, you can use it for dial-line answer-only 
applications, dial a previously stored telephone number 
from the front panel, or dial telephone numbers via an 
external source (telephone).

In Leased-Line mode, the Modem connects to the leased 
line and stands ready to send and receive data. Use 
Quick Setup 6 if the leased line is a  2-wire line and you 
want to configure the Modem as the originate modem.