Справочник Пользователя для HGST TRAVELSTAR 80GN 30GB ATA5 08K0910
Модели
08K0910
Travelstar 80GN Hard Disk Drive Specification
32
6.4.2 Mounting hole locations
The mounting hole locations and size of the drive are shown below.
Figure 2: Mounting hole locations
6.4.3 Connector and jumper description
A jumper is used to designate the drive address as either master or slave. The jumper setting method is described in
Section 7.10, “Drive address setting” on page 55.
Section 7.10, “Drive address setting” on page 55.
Connector specifications are included in Section 7.2, “Interface connector” on page 39.