Справочник Пользователя для Rio Audio 41000855-004_B
37
Rio Nitrus
What should I do if the
display permanently locks
up, does not display, or
displays UPGRADER?
• If you cannot read the display, the player firmware may be corrupted. Corrupted
firmware may be caused by a failed firmware update. If the player’s firmware
becomes corrupted for any reason, follow these steps to start the player in
Recovery Mode and proceed with the firmware update.
1 Reset the player by inserting a pin or needle into the
next to the
DC IN port.
2 Press POWER. The player should power on as normal.
If the player continues to lock up or does not display properly:
1 Reset the player by inserting a pin or needle into the RESET HOLE next to the
DC IN port.
2 Press and hold MENU + POWER until UPGRADER is displayed on the screen.
3 Connect the Rio Nitrus player to the computer using the USB cable.
Proceed with the
Why won’t the Rio Nitrus
play secure, dated, or
other DRM (digital rights
management) encoded
files?
• DRM files may not work properly if the Rio Nitrus’ internal clock is no longer
accurate. This can happen if the rechargable batteries lose all charge for any
period of time. Make sure the batteries are fully charged, then follow these steps:
1 Connect the Rio Nitrus to the computer using the USB cable.
2 Connect to the secure service where the DRM encoded files came from.
The Rio Nitrus’ clock should reset.
DRM files should now play correctly.