Справочник Пользователя для Olympus DM-4

Скачать
Страница из 185
1
EN
Po
w
er s
up
ply
Connect to the USB connecting AC 
adapter (optional) to charge
It can be charged by connecting to the USB 
connecting AC adapter (A514) (optional).
Before connecting the AC adapter, switch 
the USB Connection setting to [AC] (☞ P.96).
1
 Plug the AC adapter into AC
outlet.
2
 Plug the recorder’s USB
connecting cable into the AC
adapter.
3
 Make sure that the recorder is
turned off, connect the USB cable
to the connecting terminal on the
bottom of this recorder.
•  Charging  has  started  when  LED 
indicator light is orange and the battery 
indicator on the display changes to the 
charging indicator.
  Notes
•  The recorder cannot be charged when the 
PC is not turned on. Also, it may not be 
charged when the PC is not switched on, 
or when it is in the standby, hibernate or 
sleep mode.
•  Do not charge the recorder with the USB 
hub connected.
•  Charging is completed when battery 
indication becomes [<] (charging time: 
approximately 3 hours *).
  *  It shows the approximate time when 
charging the rechargeable battery fully 
from no remaining power at the room 
temperature. The charging time will be 
changed depending on the remaining 
amount and the state of battery.
•  You cannot charge when [;]*1 or [=]*2 
is displayed. Charge the battery at the 
temperature from 5°C to 35°C (41°F to 95°F).
*1 [;]:  When surrounding temperature is 
low.
*2 [=]:  When surrounding temperature is 
high.
•  When using time becomes notably short 
even after the battery are fully charged, 
replace them with new ones.
•  Be sure to push the USB connector all the 
way in. Otherwise, the recorder may not 
operate properly.
•  Be sure to use the attached dedicated 
cable for the USB connection cable. If 
any other company’s cable is used, it 
may cause problems. Also, please do not 
connect this dedicated cable to any other 
company’s product.
Power supply