Справочник Пользователя для Olympus DM-3

Скачать
Страница из 175
168
8
EN
Troubleshooting
Symptom
Probable cause
Action
Nothing appears on
the display
The battery is not loaded properly.
Check the direction of the battery. 
(☞ P.21).
Battery power is getting low.
Charge the battery (☞ P.21 to P.25).
The power is off.
Turn the power on (☞ P.26).
Won’t start
Battery power is getting low.
Replace with new battery (☞ P.21 to P.25).
The power is off.
Turn the power on (☞ P.26).
The recorder is in HOLD mode.
Release the recorder from HOLD (☞ P.27).
Unable to record
Low remaining memory.
Erase unnecessary files (☞ P.60).
The maximum number of files has 
been reached.
Change to the another folder 
(☞ P.32, P.38).
No playback tone
heard
The earphone is connected.
Unplug the earphones to use the 
internal speaker.
The volume level is set to [00]. 
Adjust the volume level (☞ P.46).
The recording level has not been 
adjusted.
Adjust the recording level and then try 
recording once more (☞ P.67).
Recording level too
low
The microphone sensitivity is too low. Set the microphone sensitivity to [High
or [Middle] mode and try again (☞ P.67).
This could potentially be because 
the output level for the connected 
external devices are too low. 
Adjust the output level for the 
connected devices.
Message
Meaning
Explanation
Action
[Please Select The
File]
Unselected File
File is not selected.
Please select a file then 
carry out the operation 
(☞ P.53 to P.59).
[Same folder. Can't be
moved(copied).]
File cannot be moved 
(copied).
Attempting to move (copy) 
into the same folder.
Please select another 
folder.
[Same files. Can't be
moved(copied).]
File cannot be moved 
(copied).
File in the destination 
with the same name, or 
file with DRM.
Please select another file.
[This file can't be
divided.]
File which cannot be split.
Attempting to split a file 
besides the PCM files 
recorded in this recorder.
Please select another file.
Alarm message list/Troubleshooting
Alarm message list/ 
Troubleshooting