Справочник Пользователя для Motorola MT2070
Chapter 5 User Preferences & Miscellaneous
Scanner Options
Scanner Options
Introduction
You can program the device to perform various functions, or activate different features. This chapter describes
each user preference feature and provides programming bar codes for selecting these features.
each user preference feature and provides programming bar codes for selecting these features.
The device ships with the settings shown in
for all host device and miscellaneous defaults). If the default values suit requirements, programming is
not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile
memory and are preserved even when the device is powered down.
memory and are preserved even when the device is powered down.
If not using a USB cable, select a host type (see each host chapter for specific host information) after the power-up
beeps sound. This is only necessary upon the first power-up when connected to a new host.
beeps sound. This is only necessary upon the first power-up when connected to a new host.
. Throughout the programming
bar code menus, asterisks indicate (
*
)default values.
NOTE
Most computer monitors allow scanning the bar codes directly on the screen (when using the imaging
engine). When scanning from the screen, be sure to set the document magnification to a level where you
can see the bar code clearly, and bars and/or spaces are not merging.
engine). When scanning from the screen, be sure to set the document magnification to a level where you
can see the bar code clearly, and bars and/or spaces are not merging.
*
High Volume
(00h)
Feature/Option
*
Indicates Default
Option Hex Value