Справочник Пользователя для Panasonic CF-Y7

30

Follow the instructions below when an error code or message appears. If the problem persists or if the error code/mes-
sage displayed is not shown here, contact your technical support office.

A

Restart the computer.

B

Press F2 while [Panasonic] boot screen is displayed.

The Reference Manual is not 
displayed.

Install Adobe Reader.

A

Log on to Windows as an administrator.

B

Click [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click [OK]. 
Follow the on-screen instructions.

C

Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help] - 
[Check for updates now].

A serial number is 
requested when reinstalling.

Input the following serial number.
B’s Recorder: 
B’s CLiP:

No response.

Press 

Ctrl

+

Shift

+

Esc

 to open Task Manager and close the software application that 

is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind another 
window. Press 

Alt

+

Tab

 to check.

Slide the power switch for four seconds or longer to shut down the computer, and then 
slide the power switch to turn it on. If the application program does not work normally, 
uninstall and reinstall the program. To uninstall, click [start] - [Control Panel] - [Add or 
Remove Programs].

Disconnect external keyboard.

An error has occurred in the memory of Setup Utility settings. This occurs when the memory con-
tent is changed by an unexpected program operation, etc. 

Start the Setup Utility and return the settings to the default values, and then change the set-
tings as necessary.
If the problem persists, the internal clock battery may need to be replaced. Contact your tech-
nical support office.

The date and time settings are not correct.

Start the Setup Utility and set the correct date and time.
If the problem persists, the internal clock battery may need to be replaced. Contact your tech-
nical support office.

Startup has failed repeatedly, so the Setup Utility settings have been returned to the default val-
ues to startup the computer.

Start the Setup Utility and return the settings to the default values, and then change the set-
tings as necessary.

Write down the error details and press 

F2

 to start the Setup Utility. Change the settings if 

necessary.

The operating system is not installed in the floppy disk or the hard disk that you are going to boot 
from.

If using a floppy disk, change the disk to the one you can use for boot.
If using the hard disk, check if the hard disk is recognized in [Information] menu of the Setup 
Utility. If the hard disk is recognized, perform the reinstallation (

page 25). If not, contact 

your technical support office.
If a device is connected to the USB port, disconnect the device, or set [Legacy USB Support] 
to [Disable] in the [Advanced] menu of the Setup Utility.