Справочник Пользователя для Acer 1600 series
Software
76
En
glish
Changing a password
To change a password, follow step 1 in “Setting a password” on page 75. Enter the
current password, then enter a new password. Retype your new password to verify
your first entry.
current password, then enter a new password. Retype your new password to verify
your first entry.
Removing a password
To remove a password, follow step 1 in “Setting a password” on page 75. Enter the
current password, then leave the Enter New Password and Cofirm New Password
blank.
current password, then leave the Enter New Password and Cofirm New Password
blank.
A note on HT Technology
Hyper-Threading (HT) Technology is only supported by Intel® Pentium® 4 processor
running at 3.06 GHz or higher. This technology enables the processor to executes two
threads (a part of a program) in parallel. Your software can run more efficiently and
you can multitask more effectively.
running at 3.06 GHz or higher. This technology enables the processor to executes two
threads (a part of a program) in parallel. Your software can run more efficiently and
you can multitask more effectively.
To enable the HT Technology function, go to the Advanced screen and select the
Hyper-Threading item. Press F5 or F6 to enable the function.
Hyper-Threading item. Press F5 or F6 to enable the function.
To exit the BIOS Utility
To exit the BIOS Utiliy, go the the Exit screen and choose an item and press Enter. Press
Enter again to confirm the selection.
Enter again to confirm the selection.
As1600_E.book Page 76 Thursday, January 30, 2003 9:51 AM