Справочник Пользователя для IBM 380Z
When Both Power-on Password and Supervisor
Password are Set.
Password are Set.
1. Power off the computer.
2. Press and hold F1; then power on the computer.
2. Press and hold F1; then power on the computer.
After a few seconds, the password prompt
appears.
appears.
3. Enter your supervisor password. The
Easy-Setup Main Menu appears.
4. Select Password and then Power on. A
rectangular box appears.
5. Enter your supervisor password and press the
Space bar once.
6. Press Enter twice.
7. Select Exit.
8. Select Restart on the Easy-Setup Main Menu
and wait until the POST ends.
9. Reinstall the memory-slot cover, and turn the
computer right side up.
Verify that the password prompt does not appear.
To reactivate the password, set the password again.
Reset Switch:
The Reset switch resets the system
regardless of the microcode status and forces a power off.
Use this push button to power off when power is not
completely off or when the microcode is in a hung state.
Use this push button to power off when power is not
completely off or when the microcode is in a hung state.
ThinkPad 380Z
7