Справочник Пользователя для Samsung NP940X3GK01US

Network & Internet

56

•  When connected to a 100Mbps/1Gbps wired LAN , a 

message appears informing the user of connection to 
a 10Mbps/100Mbps wired LAN when the computer 
wakes from sleep mode. This happens because 
restoring the network takes about 3 seconds. When the 
network is restored, the computer will be connected to 
the 100Mbps/1Gbps LAN.

•  When the system is running on battery power, it may 

take a few seconds for the connection to be established 
when connecting a LAN cable. This is the result of 
power saving features designed to reduce battery 
consumption.

•  When the system is running on battery power, the 

speed of a wired LAN is decreased automatically 
to reduce battery consumption. In this case, a 
1Gbps/100Mbps LAN would function at the speed of a 
100Mbps/10Mbps connection.

Activate the system remotely from sleep mode when a signal, 
such as a ping or magic packet command, is received via a wired 
LAN.

1 

On the desktop, open the Charms and select the Settings 
charm 

→ Control Panel → Network and Internet → 

Network and Sharing Center 

→ Change adapter settings.

2 

Right-click Ethernet and select Properties.

3 

Select Configure… 

→ Power Management → Allow this 

device to wake the computer 

→ OK.

4 

Restart the computer.

•  If the computer wakes up from sleep mode inadvertently, 

disable the Wake on LAN feature.

•  This feature may not work while using other power saving 

features. To disable other sleep functions, select the 
Settings charm 

→ Control Panel → Hardware and Sound 

and then set Power Options.

•  Windows 8 does not support ping-enabled Wake On LAN.