Справочник Пользователя для Samsung NB30JP02

109

A memory is installed in the memory slot at the bottom of this computer. The 

procedures to replace the memory are described below.



 Replace new memory only after shutting the computer down completely. Do not 

replace  memory when the computer is in Sleep mode.



 Disconnect main power plug and remove the battery before continuing.



Only use the same type of memory as specified in the Product Specification.



The memory compartment cover may differ from the figure below.



 You must use only memory modules 

with the specifications (DDR2 or

DDR3) printed on the memory slot that 

appears when you open the memory 

compartment cover at the bottom.

e.g) in the case of using DDR2

  Remove the screw on the memory 

compartment cover at the bottom of 

the computer using a screw driver.

 Pull the memory module latches

outward. The memory module will pop 

up.
Remove the memory module out at 

an angle of 30 degrees.