Справочник Пользователя для Samsung C675D

User’s Manual

6-14

Please also refer to Chapter 3, 

, and to the documentation 

supplied with your monitor for further information.

Annoying sound is 

heard

In this instance you may be experiencing feedback 

from either the internal microphone or an external 

microphone connected to the computer - please 

 in Chapter 3, Operating 

Basics for further information.
Volume cannot be adjusted during Windows start 

up or shut down.
If you are still unable to resolve the problem, 

contact TOSHIBA Support.

Monitor does not turn 

on 

After confirming that the monitor's power switch is 

on, you should check the connections to make sure 

that the power cord/adaptor is firmly connected to 

the monitor and to a working power outlet.

No display

Try adjusting the contrast and brightness controls 

on the external monitor.
Press the FN + F5 hot key in order to change the 

display priority and ensure that it is not set for the 

internal display only.
Check to see if the external monitor is connected.
When the external monitor is set as the primary 

display device in extended desktop mode, it will not 

display when the computer wakes up from Sleep 

Mode if the external monitor has been disconnected 

while in Sleep Mode.
To keep this from happening, do not disconnect the 

external monitor while the computer is in Sleep or 

Hibernation Mode.
Remember to turn off the computer before 

disconnecting the external monitor.
When the display panel and an external monitor are 

set to clone mode and they are turned off by the 

timer, the display panel or the external monitor may 

not display when turned on again.
If this occurs, press FN + F5 to re-set the display 

panel and external monitor to clone mode.