Справочник Пользователя для Abocom UTA128
Windows ME Installation
1. Connect the rectangular end of the USB cable
into the USB host port of your computer, and
the square end into the USB port of your
network adapter. Windows ME will
automatically detect the device. Insert the
device driver into your CD-ROM drive, select
Automatic search for…and click Next.
Windows ME will search for appropriate
driver and copy necessary files onto your
system.
the square end into the USB port of your
network adapter. Windows ME will
automatically detect the device. Insert the
device driver into your CD-ROM drive, select
Automatic search for…and click Next.
Windows ME will search for appropriate
driver and copy necessary files onto your
system.
2. Click
Finish.
3. When
the
ISDN Configuration windows
appears, click Next.
4. Select
appropriate
Switch Protocol and click
Next.
5. Enter
the
Phone numbers that your ISP
provided and click Next.
6. Click Finish to complete the software
installation.
7. To verify if your network adapter exists in
your computer and well enabled, you can
perform the following steps.
perform the following steps.
8. Go to Start, Settings, Control Panel,
Systems and then Device Manager.
9. Click
Intelligent ISDN Drivers and Network
adapters to expand. If Intelligent CAPI 2.0
driver, Intelligent USB adapter and
Intelligent ISDN WAN miniport are found,
driver, Intelligent USB adapter and
Intelligent ISDN WAN miniport are found,
- 10 -