Справочник Пользователя для Cisco Systems NSS2000 Series

Step 3 — Use the Quick Setup Wizards to Configure the NSS

NSS2000 Getting Started Guide

13

It is a good idea to do a quick check of the information on the System Status page 
to ensure that your hardware installation was successful and that this system is not 
reporting any errors. For example, the Ethernet link is up and in good condition, the 
right number of disk drives installed appear, and so on. For a detailed description 
of the information on the System Status page, click the Help button in the upper-
right corner.

There are three wizards available from the Manager Menu of the configuration 
interface:

•

Initial Setup: This wizard automatically appears when you log into the 
configuration interface for the first time. Although you can access it at any 
time from the Manager Menu, if you have saved any configuration settings 
before you run the wizard, note that running the wizard will erase any saved 
data. For example, if you configure a RAID and then run the wizard, the RAID 
will be deleted. This wizard steps you through the basic configuration to 
create a RAID, volume, share, user, to set the Home Directory location, set 
the time, and so on. (For detailed help on the full set of configuration options,