Справочник Пользователя для Compex Technologies WPE54
Chapter 5
Further Configuration
66
4.5.2
How to set up WPA-PSK
[Available in AP/Gateway mode ONLY]
The guidelines below will help you to set up the access point for using WPA-
PSK. Please take note that the WPA-PSK, WPA2-PSK and WPA-PSK-
AUTO security modes share the same functions).
Security Mode –WPA-PSK, WPA2-PSK, WPA-PSK-AUTO
At the WLAN Security Setup
page:
Select WPA-PSK mode.
Click on
Apply
button.
Specify the key entry format by
selecting either:
•
selecting either:
•
Passphrase (Alphanumeric
characters)
characters)
•
Hexadecimal
Fill in the pre-shared network
key.
If you are using the Passphrase format, your entry can consist of a minimum of 8
alphanumeric characters or a maximum of 63 alphanumeric characters.
Otherwise, when using the Hexadecimal format, your entry MUST consist of 64
hexadecimal characters.
The Cipher Type is set to TKIP.
Define the GTK update (Group Transient Key update), or the length of time after which the
access point will automatically generate a new master key.
alphanumeric characters or a maximum of 63 alphanumeric characters.
Otherwise, when using the Hexadecimal format, your entry MUST consist of 64
hexadecimal characters.
The Cipher Type is set to TKIP.
Define the GTK update (Group Transient Key update), or the length of time after which the
access point will automatically generate a new master key.