Справочник Пользователя для Cabletron Systems 9A128-01
The 9A128-01 Module View
2-20
Managing the Hub
2.
Drag to Find Source Address.... The following window will appear.
Figure 2-10. Find Source Address Window
3.
In the text field in the middle of the window, enter a valid MAC address in Hex
format and then click
format and then click
.
If the address is found in the 802.1d Bridge Filtering Database, the port through
which the address is communicating will flash in the front panel Module View
port display.
which the address is communicating will flash in the front panel Module View
port display.
If the address is not found in the Filtering Database, a separate window will
appear with a “Can’t Find Source Address” message.
appear with a “Can’t Find Source Address” message.
Managing the Hub
In addition to the performance and configuration information described in the
preceding sections, the Module View also provides you with the tools you need to
configure your hub and keep it operating properly. Hub management functions
include setting device date and time and enabling and disabling ports.
preceding sections, the Module View also provides you with the tools you need to
configure your hub and keep it operating properly. Hub management functions
include setting device date and time and enabling and disabling ports.
Setting the Device Date and Time
From the Device menu you can select the Edit Device Time and Edit Device Date
options to change the date and time stored in the device’s internal clock.
options to change the date and time stored in the device’s internal clock.
To edit the device time:
1.
Click on Device on the Module View window menu bar to access the Device
menu; drag down to Edit Device Time, and release.
menu; drag down to Edit Device Time, and release.
2.
, will appear.