Справочник Пользователя для Cabletron Systems W85
Chapter 2: Installation
2-6
HSIM-W85 User’s Guide
8.
Press down firmly on the HSIM-W85 until the connector slides all the
way onto the HSIM pins. Ensure that the standoffs on the standalone
device align with the standoff screw holes on the HSIM-W85.
way onto the HSIM pins. Ensure that the standoffs on the standalone
device align with the standoff screw holes on the HSIM-W85.
9.
Secure the HSIM-W85 to the module faceplate using the mounting
screws saved in
screws saved in
10.
Secure the HSIM-W85 to the module standoffs using the standoff
screws included in the HSIM-W85 shipping materials.
screws included in the HSIM-W85 shipping materials.
11.
Replace the chassis cover on the standalone device, reconnect the
power cord, and reconnect the standalone device to the network.
power cord, and reconnect the standalone device to the network.
2.3
CONNECTING THE HSIM-W85 TO THE NETWORK
The HSIM-W85 is connected to the carrier’s DS1 service using twisted
pair cable. The cable may run a maximum of 5000 feet or greater,
depending on the dB loss of the cable. Refer to
pair cable. The cable may run a maximum of 5000 feet or greater,
depending on the dB loss of the cable. Refer to
details on cable length. The Cabletron Systems part number for the T1
cable is 9732094.
cable is 9732094.
Figure B-3
HSIM-W85 Cable Connection
For information on configurations for the HSIM-W85, refer to
.
Ensure that the chassis cover is in place before reconnecting
the power cord.
the power cord.
Telco Cloud
2842_1
2E42-27 with HSIM-W85
HSIM-W85
CPU
L
S L
S L
S L
S L
S L
S L
S L
S
Wall Jack
Cable Part
Number:
9372094
9372094