Справочник Пользователя для Siemens 2000592-001

 

The Fiber Optic Coupler is mounted in a threaded, potted, gas tight fitting 
assembly designed for use in hazadrous areas when properly installed in 
a approved enclosure. Two Fiber Optic Couplers are required, one for 
DataNET Channel A and one for DataNET Channel B. The couplers are 
mounted through pre-drilled holes located in the top or side of the wiring 
acess plates or safety box. 

 

 

All mounting hardware is supplied with the DataNET Fiber Optic parts kit. 
These parts are also available as spares and can be ordered from us. 

Fiber Optic Coupler Assembly 

2015828-001 
 

Fiber Optics Coupler Seal Nut 

N8005 
 

Fiber Optic Coupler Cable 

2020947-0011 
 

 

 

The DataNET Fiber Optic Coupler performs translation of signals 
between a DataNET Hub and Advance Maxum. The Fiber Optic Coupler 
converts between electrical signals and optical signals. The conversion is 
transparent to the network. Fiber Optic signals are impervious to 
distubances caused by electrical interference from nearby equipment, 
ground loops, power surges, or nearby lightning strikes.  

DataNET Fiber Optics Couplers can drive up to 5000 feet of fiber optic 
cable. 

 

•  Installation