Справочник Пользователя для Panduit DPOE12U1XY

® DPoE™ Power Patch Panel User’s Guide 

Issue 2.2 

 

 

Part Number: PN378A 

 

 

 

 

 

  

50

 

 

 

An important feature of the DPoE™ Power Patch Panel is its ability to continue 
supplying Power over Ethernet during firmware updates.  All IEEE 802.3af and 
Cisco In-Line protocol legacy powered devices connected to the Panel will remain 
powered during a firmware update. Cisco In-Line protocol legacy new powered 
device detection may experience an interruption during a firmware update.  

 
Insure that the DPoE™ device is connected to a Network with the PC that has the Element Manager 
application running and has the device to be programmed discovered (see Device Discovery Section). 
 

Detailed Description of the Firmware Update 

 

1.  Download the new DPoE™ product file from 

www.panduit.com/ManagedNetworkSolutions

 to a 

directory location on your intranet (internal network). 

 
2.  Start a local TFTP server. This may require downloading and configuring TFTP server freeware 

or shareware from the Internet (refer to the TFTP Server Install Document). Note: When 
configuring your TFTP Server, the TPTF root directory must point to the directory where the new 
DPoE™ 

product file is stored. 

 

3. The 

 option under the Tools pull-down menu opens a window that identifies the 

IP address, device type and device name. The window as shown in the EM Firmware Update 
Screen can then be used to initiate the TFTP firmware update by the user entering the firmware 
filename and IP address of the TFTP server.