Справочник Пользователя для Toshiba 95-810500-00
COPYRIGHT
2007 ENTONE, INC. ALL RIGHTS RESERVED
.
Hydra Quick Reference (P/N 95-810500-00)
4
7. Programming Remotes For Use With Hydra
First, you must program your remotes for use with your Hydra. The Hydra comes with 3 URC remotes.
Each remote can be programmed for use with a different TV/Room. (Refer to the Hydra User’s Guide for
more information on in-home configurations.)
Each remote can be programmed for use with a different TV/Room. (Refer to the Hydra User’s Guide for
more information on in-home configurations.)
Press and hold the “OK“ button on the Hydra front panel for about 5 seconds. When the “OK”
button is released, the Hydra front panel Standby/On LED blinks twice (alternates red and green),
then stays lit red to indicate that the Hydra is now in remote registration mode.
button is released, the Hydra front panel Standby/On LED blinks twice (alternates red and green),
then stays lit red to indicate that the Hydra is now in remote registration mode.
Identify the remote control, which is labeled with a number 1, 2, or 3 on the battery cover plate on
the bottom of the remote, as shown below:
the bottom of the remote, as shown below:
Press and hold the “STB” button on the remote control for about 4 to 5 seconds. The “STB” button
backlight LED will light to indicate that the remote control is in registration mode.
backlight LED will light to indicate that the remote control is in registration mode.
Use the number keys to send the registration event:
•
Press “1” to send the “Register remote control to Decoder 1” event for Remote #1.
•
Press “2” to send the “Register remote control to Decoder 2” event for Remote #2.
•
Press “3” to send the “Register remote control to Decoder 3” event for Remote #3.
•
Press “0” to set remote control to IR mode only. The remote control will not send any RF
signal.
signal.