Справочник Пользователя для Panasonic WJ-GXD900
25
ALM
/
0F000xxx
XX
XX
/
00
YYYY
MM
DD hh
mm
ss
+/-
xxxx
xxxx
xx
(Fixed)
(Fixed)
8 digits
Alarm type
Number
(Fixed)
Fixed
Alarm Occurred Time (GMT)
Time Zone
Alarm Code
Contact Number
(Year/Month/Date/Hour/Minute/Second)
ALARM IN
• Alarms
The encoder can receive the following alarms.
• DRY CONTACT (Contact alarm)
• CAMERA SITE ALARM (Overlapped alarm output signal with camera video signal supplied from a camera when the
• CAMERA SITE ALARM (Overlapped alarm output signal with camera video signal supplied from a camera when the
video motion detection function of a camera is activated, or when an alarm device such as a sensor connected to
the alarm input connector of the camera is activated.)
the alarm input connector of the camera is activated.)
• VIDEO LOSS ALARM (Alarm output signal supplied from a camera when a camera is malfunctioning, the power of
the camera is off, when a wire is broken, if there is connection trouble, etc.)
• Action of the encoder when an alarm is received
By setting the ALARM page, you can set the encoder to activate the following operations simultaneously when the
above alarms occurred.
above alarms occurred.
• Displaying the selected preset position of the camera
• Changing the bit rate of video and audio
• Sending an alarm notification command to the designated IP address with the designated port number (IP address:
• Changing the bit rate of video and audio
• Sending an alarm notification command to the designated IP address with the designated port number (IP address:
Port No.).
• Alarm notification command
The format of the alarm notification command is as below.
The alarm notification command is sent in the form of a TCP/IP protocol packet.
Perform the settings of destination (IP address and port number) to which the alarm notification command is to be sent
in the "ALARM NOTIFICATION IP ADDRESS" input box on the ALARM page.
The alarm notification command is sent in the form of a TCP/IP protocol packet.
Perform the settings of destination (IP address and port number) to which the alarm notification command is to be sent
in the "ALARM NOTIFICATION IP ADDRESS" input box on the ALARM page.
MAC
IP
TCP Header
TCP Data
Details of the "TCP/IP Data" part
ALM
Fixed
Alarm Identifier
/
Fixed
0F000xxx
8 digits
Identifier number of the encoder ("xxx" part is the set value for the rotary switch on
the front panel of the encoder)
XX
Alarm type
20: Camera Site Alarm, Video Loss Alarm
40: Contact Alarm
XX
Number
Numbers in order of camera site alarm or video loss alarm occurrence
00: 1, In case of contact alarm occurrence, fixed to 00.
01: 2
02: 3
03: 4
/
Fixed
00
Fixed
YYYY
4 digits: Alarm Occurred Time (Year)
MM
2 digits: Alarm Occurred Time (Month)
DD
2 digits: Alarm Occurred Time (Date)
(continues)