Листовка для Infortrend A08F-G1A2 FC-to-SATA RAID Subsystem 8 drives in 2U rack space A08F-G1A2-M1

 Two 2Gbps Fibre host channels;

  transfer rate up to 200MB/sec for
  each 
   - OR -
  Two SCSI-160 host channels
.

  Full-featured hardware RAID

  architecture
.

  Online array expansion by adding

  drives or replacing with larger
  drives
.

  Tunable array stripe size and

  optimization schemes
.

  Multiple Logical Drive 

  configurations , each with a
  different RAID level
.

  Auto detection, auto rebuild, hot

  spare, and hot swap capabilities
.

  Centralized access

  management in SAN by WWN
.

  Up to 1024 LUNs for host 

  Auto system shutdown and cache 

  flush on critical conditions
.

  Intelligent Drive Handling : for

  managing bad blocks during
  rebuild and the manual Media Scan
  function for sector repair
.

  Transparent resetting of hung

  HDDs 
.

  Up to 64TB maximum capacity per

  logical drive

TM

  RAIDWatch : Browser-based GUI

  manager on all major platforms

The EonStor A08 single RAID 
controller subsystem series 
comes in a cableless, backplane-
based, highest-density 2U 
enclosure.   

The EonStor subsystem combines 
either 2Gbps Fibre (A08F) or SCSI- 
(A08U) host channels with 8 SATA 
drives in a storage subsystem. The 
system design provides users 
massive storage capacity with SATA 
benefits such as high performance 
and full bandwidth to each connected
device, in a safe subsystem 
environment where a highest level of 
data availability is assured.

The RAID controller embedded in 
the EonStor RAID subsystem 
ensures unprecedented data 
security for ATA RAID.  The two 
available models (see table) in these 
series provide users with versatile 
options enabling them to purchase a 
subsystem that will meet their needs.  

The SATA models enables users to 
use serial ATA drives in the 
subsystem whereas the availability 
of a separate dongle kit allows for 
the use of PATA drives providing a 
less expensive option for an 
economic yet reliable RAID 
subsystem.  

                                    

ES A08F-G1A2     2 FC-2G        

   

8 SATA-1

ES A08U-G1A3     2 SCSI-160    8 SATA-1

Running on an architecture trusted 
by the most demanding applications, 
the subsystem is equipped with 
intelligent algorithms capable of 
bridging the point-to-point 
bandwidth of SATA drives with high 
speed host channels.  Its separate-
bus backbone is built around the 
dedicated XOR engines capable of 
fast parity calculation and I/O 
turnarounds.  The distribution of 
data can be optimized with 
configurable array settings and the 
free association between individual 
arrays and different optimization 
modes.  

Featuring a 64-bit 133MHz memory 
bus, the unparalleled bandwidth 
makes the subsystem's high data 
throughput more than sufficient for 
small-to-medium sized servers or 
workstations.  Data can be 
distributed at the burst rate up to 
1066MB/sec.  The dual PCI bus 
design virtually eliminates all 
imminent bottlenecks on IO traffic, 
providing sufficient throughput for a 
wide range of applications on SCSI-
based PCs, single-user 
workstations, NT, Linux, or Unix-
based servers. These applications 
include disk-to-disk backup, Video 
on Demand, CCTV, and stream 
editing.